Maximum Motorsports Bump steer kit, bolt through, 1994-04 Mustang

Maximum Motorsports Bump steer kit, bolt through, 1994-04 Mustang

Bumpsteer is a term for the situation where the front toe changes as the suspension moves up and down. If the toe changes more than a very small amount it will cause the car to change direction, making the car unstable and unpredictable. MM offers two types of Adjustable Tie-Rod Ends. The tapered stud type can be used to make moderate changes to the geometry. It is best suited for use with a stock K-member, and does not require any modification to the spindle. The bolt-through spindle type has a much wider range of adjustment. It is required for most situations when installing a MM K-Member and requires drilling out the tapered hole in the spindle to accept a 5/8 bolt. The installation of any adjustable tie-rod end requires that your car be measured for bumpsteer. This can be done by following our copyrighted step-by-step instructions. Look at our MMT-4 Bumpsteer kit for all that you need to be able to measure and adjust the bumpsteer on your car.

Reviews

Ask a question about this product